1 / 3
Felder AF16 Adaptor 160mm to single or double 120mm Air Duct
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adapter to connect a single or two 120mm hoses to the 160mm inlet of a Felder AF16 Dust Collector.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 170
- Wydruki
- 2
- Wyświetlenia
- 996
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 2) (Komentarze: 6)Remiksy (0)Kolekcje (35)Powiązane
Prints on a Bambulab X1C in about 3h30 with 150g of filament for the single duct and 5h50 / 290g of filament for the double hose one. I recommend 3 wall layers and 25% infill. Prints without support. Turn the double adaptor with the two ports downwards and position it diagonally on the plate.
You can't buy such adaptors from Felder for their dust extractor, so I had to make it!
Designed in Fusion 360 - please share your makes and have fun!