1 / 1
Sliding PTFE connector adapter for Tukkari TF enclosure — zdjęcie 1

Sliding PTFE connector adapter for Tukkari TF enclosure

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A small sliding mount for a PTFE connector fitting to guide filament through a PTFE tube into the Tukkari TF enclosure.

Ocena
0 / 5
Polubienia
8
Pobrania
26
Wydruki
0
Wyświetlenia
241
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Accessories
Licencja
Creative Commons — Attribution

This is a small sliding clip to mount a PTFE connector to the Tukkari TF enclosure. I use it as an inlet for a PTFE tube connecting my eSUN eBox dryer.

PLA+ works good for this print, slides nicely without grabbing the acrylic. Print the two halves, install the M6 connector and screw the two halves together with two short M2 bolts. I used M2x8 but they could be even shorter.