Gameboy Pocket Display Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is my custom made stand for my Gameboy Pocket which i spent a couple afternoons designing. After learning a few…
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 133
- Wydruki
- 2
- Wyświetlenia
- 435
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is my custom made stand for my Gameboy Pocket which i spent a couple afternoons designing.
After learning a few new things and keeping my DMG stand in mind when designing, I feel I have created an appropriate stand to match my collection, a little brother to the bigger model if you will.
Similar to the GB Original stand, this too has been contoured to as many curves as i could model in the base to maximise stability. This one has turned out even better than id hoped even though its not perfect.
A Creality CR-10S PRO V2 printer was used in producing the product in the images.
No rafts, brims or supports were needed using my machine but this may be subject to change depending on your preferences,
I would recommend around 10 - 15% infill of any sort to support the top surfaces and a print speed around 50mm/s at most to get better clarity on the text.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
No
Resolution:
400
Infill:
10
Filament: 3DFillies PLA+ Black
Notes:
0.16mm layer height used with regular higher resolution settings to get the final product in images, this allowed text to come out fine.
Category: Toy & Game Accessories