Game Boy (Original / DMG) Display Stand V1
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is actually my second revision to an original plan I made, but since it looked so different I decided this would…
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 265
- Wydruki
- 2
- Wyświetlenia
- 766
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Toys
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This is actually my second revision to an original plan I made, but since it looked so different I decided this would be Version 1 of my final design.
As you'll see in the pictures, this is mostly contoured to the rounded bottom of this model Gameboy which makes it fit perfectly, turned out far more stable than I was expecting and doesnt tip over easy.
A Creality CR-10S PRO V2 printer was used in producing the product in the images.
No rafts, brims or supports were needed using my machine but this may be subject to change depending on your preferences,
I would recommend 15% infill of any sort to support the top surfaces and a print speed around 50mm/s at most to get better clarity on the text.
Current plans for the future are to make a similar looking one for my Gameboy Pocket and new designs for my Gameboy Color and GBAs.
Print Settings
Printer Brand:
Creality
Printer:
CR10S PRO
Rafts:
No
Supports:
No
Resolution:
200
Infill:
15
Filament: 3DFillies PLA+ Marble
Notes:
Only chose this filament colour because I thought it would look cool.
0.16mm layer height worked well to get the quality i was after.
Typical 200C Nozzle temp and 50C Bed temp worked fine for this.
Category: Toy & Game Accessories