1 / 3
Yin and Yang holder for Shungite stones — zdjęcie 1
1 / 3

Yin and Yang holder for Shungite stones

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a model to hold 30mm Shungite and Soapstone cylindrical meditation stones.

Ocena
0 / 5
Polubienia
6
Pobrania
31
Wydruki
0
Wyświetlenia
109
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Standard Digital File License

The Yin and the Yang are both printed from the same file. There is a small tab that will align to a small slot. You will need to print it twice in different colors.

Add supports! The tab needs supports. I also used supports in the slot. Print bottom Side down and slice with supports everywhere! I chose .2mm detail and it looks great.

After removing the little bit of supports, you will need to glue the two pieces together. Use a small amount of CA or your favorite 3D printing glue.

 

I hope you ❤ Like this design!

Tagi