Anycubic Wash & Cure 2.0 Replacement Rotating Plateau
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Somehow I managed to loose (how???) my rotating plateau, but with a 3d printer at hand who is there to worry!
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 296
- Wydruki
- 1
- Wyświetlenia
- 1120
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Due to loosing my original replacement platform I took some pictures, fired up illustrator and did my best to design a part that fits on the screw that rotates just as nice as the original.
I have uploaded 2 versions, 1 can easily be printed without supports upside down, the other one has a small ledge at the end to prevent pieces from sliding off but this means you will probably have to add supports here. Off course you can also just split the parts and superglue to back together afterwards ;)
Printed on my delta FLSUN V400 with my 0.2mm profile using 15% infill. Will uploads photos later when the print is done.
Update: The round plate was a tiny bit to big if not exactly centered, so I made it slightly smaller and more circular so it will look nicer. All the files have been updated with the new version.