1up Bike Rack Tire Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Grips the tires and snaps onto the wheel holder on the rack to reduce wobble.
- Ocena
- 0 / 5
- Polubienia
- 29
- Pobrania
- 113
- Wydruki
- 1
- Wyświetlenia
- 1867
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I find that no matter how tightly i push the bars down on my 1up, by the end of the drive something has shifted. This holder tightly grips the tires and keeps them from wobbling, which hopefully reduces the shifting around. For safety I also always velcro my rims to the rack, bikes are pricey…
I recommend going with one size up from what you need or it gets pretty tight on the tire. Experiment and see what fits best for you.
The rolled snaps tightly into place so you can keep it on the rack. Hopefully it won't fall off…
I printed on its side with full supports as the radius is pretty tight. 15% infil seemed to work well, PLA or PETG has worked so far but I might make some in ASA just in case.
There are many different ideas on this already on printables. I printed a few and none fit just right for me so I designed this one from scratch for a nice tight fit. Does that count as a remix?