Coffee Stay Fresh Bag Clip - UPDATED - Aug 16, 2024
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep coffee bean / ground fresh
- Ocena
- 4,777 / 5
- Polubienia
- 1286
- Pobrania
- 10 491
- Wydruki
- 111
- Wyświetlenia
- 35 288
- Oceny
- 94
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
NEW Added 200mm clip arm for larger bags.
Updated: 08/16/2024 - added an extended angled version of the insert to accommodate low cabinet clearance. @Leon61 thanks for the suggestion
Updated: 04/07/2024 - added an extended version of the insert to help the cap clear the coffee bag.
Updated: 5/17/2023 - Cap is pre-scaled up to 104%.
Shout out to Minkix for the original design(https://www.thingiverse.com/thing:4744855). I had made some design changes to remedy issues encountered. Nonetheless, great concept by Minkix!!
- Sealing grooves edges were too sharp and cutting into the bag breaking the air seal.
a. A single rounded sealing groove used instead - Insert free-spins
b. A notch is added to prevent insert from free-spinning
Note: Though coffee bean/ground contact is minimal, using food grade filament for the insert is still recommended.
Notes:
Insert printed at 0.1mm layer height, 15% infill, 3 lines perimeter with 5 lines of brim
Cap printed at 0.1mm layer height, 15% infill, 3 lines perimeter
Arms printed at 0.2mm, 15% infill, 3 lines perimeter