Screw mounting for - Dremel 3000 - Schraubhalterung
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount for a Dremel 3000.
- Ocena
- 5 / 5
- Polubienia
- 90
- Pobrania
- 735
- Wydruki
- 7
- Wyświetlenia
- 3138
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
(26.09.23: step-file added)
While searching for a mount for a Dremel 3000 on Thingiverse I unfortunately didn't find a suitable one for me. Either the construction plans were for another model and didn't fit or a bracket did fit, but wasn't sufficient for my purposes.
So this design was created - for mounting on a wooden board or beam.
Dimensions: 136mm x 66mm x 66mm
Printing time: approx. 5.5 hours
Additional parts: 4 wood fixing screws Ø4.5mm, 1 M4 pan head screw with 25 mm length + nut
Print Settings
Printer Brand: Dremel Digilab
Printer: 3D20
Rafts: No
Supports: Yes
Resolution:0,2
Infill: 15%
Filament: Dremel PLA purple
Notes: Printed with Simplify3D with 5mm automatic support.