Reversible TPU Door Stop (Firm or Flexible)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Reversible TPU door stop that can be firm or flexible depending on orientation.
- Ocena
- 5 / 5
- Polubienia
- 236
- Pobrania
- 2481
- Wydruki
- 38
- Wyświetlenia
- 4658
- Oceny
- 32
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Reversible TPU Door Stop to hold a door open or closed. The cutout pattern actually serves a purpose other than looking cool. It allows you to select a firm or flexible grip on the door depending on which orientation you use. If it is wedged under the door at a spot that is hollow underneath, it will squish and flex under the door. If you reverse it and flip to the other side to stop the door where the lines join, it will stay firm and won't flex as much. You may prefer one way or the other depending on your type of floor or door, or how tight of a grip you want. I attached pictures using it both ways on the same door.
Print Settings
This model is intended to be printed in TPU. The flexibility of TPU will give the doorstop similar properties of rubber, and allow it to bend and flex while wedged under a door, and be soft enough to not scratch the door or floor.
Printer: AnkerMake M5
Filament: TPU
Infill: 10% Gyroid
Perimeters: 3
Solid Layers: 5 top, 5 bottom
Supports: No supports required
Layer Height: 0.2mm