1 / 1
filamentguide for shelf and PTFE-tubes for MMU-spool-holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Attach a PTFE-tube onto a 17mm thick shelf and guide filament out of MMU-spool-holder to create a MMU buffer.
- Ocena
- 5 / 5
- Polubienia
- 19
- Pobrania
- 86
- Wydruki
- 1
- Wyświetlenia
- 591
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Share Alike
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 1) (Komentarze: 3)Remiksy (1)Kolekcje (31)Powiązane
I wanted to attach the beginning of a PTFE tube onto a 17mm thick storage-shelf. Specifically for the purpose of an open-loop MMU buffer. I used this part together with my own design of a horizontal-filament guide for the MMU-spool-holder.
This clamp can be printed:
PLA, 0,2mm layer-heigth, 0,4mm nozzle, no support is needed.
The filament guide for MMU-spool-holder can also be printed with same settings:
PLA, 0,2mm layer-heigth, 0,4mm nozzle, no support is needed.