Menabo bycicle car trailer clamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Menabo bycicle car trailer clamp
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 305
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement for a clamp (circled on the picture below 🙂) of the arm that holds the bikes on a Menabo via 8 marzo n.3
A friend has this trailer, but sadly he lost one of the clamps and couldn't get a spare part, so he asked me if I could make him one 🙂
The model was printed in ASA, since it is supposed to have a higher resistance against UV light and is quite sturdy.
I used a 0.4mm nozzle and a 0.15mm layer heigh with cooling set to min 20% and max 50% and bridges were set to 100%. I also had to enable “Keep fan always on” otherwise the overhangs didn't print correctly.
For the hinge I used a 43.5mm, ⌀4mm steel rod