Subnautica Inspired Wall Locker
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cabinet inspired by the look of the Wall Locker in Subnautica.
- Ocena
- 5 / 5
- Polubienia
- 295
- Pobrania
- 813
- Wydruki
- 2
- Wyświetlenia
- 6251
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Public Domain
This model is designed for 320mm or larger printers. It can be printed at a smaller size, but you may need to drill out the screw holes if they're too small.
When printed at 100%, the two main sections can be assembled using 4 x brass heatset nuts (M3 x 5mm x 4mm, the size used in Voron printers) with M3 screws 6-10mm in length. Alternatively, it can be glued together.
The rest of the parts are designed to snap together, but you may want to glue them as well. The tolerances of the snap together parts are tight so you may need to sand them, apply some extra force, or print them at a reduced size.
For the buttons I used blue glow filament, and charged them up with a flashlight before taking the photo.