1 / 7
Replacement grips for the Top Ring and Handle of some Starfrit Tongs.
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement grips for the Top Ring and Handle of some Starfrit Tongs. TPU filament required!
- Ocena
- 5 / 5
- Polubienia
- 18
- Pobrania
- 33
- Wydruki
- 1
- Wyświetlenia
- 278
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 1) (Komentarze: 7)Remiksy (0)Kolekcje (22)Powiązane
I printed my replacement for the Ring Grip out of PLA and glued it together with CA glue.
However, for the Handle Grip, you will definitely need print it using TPU.
Be forewarned that it's a bit tricky to slip the replacement grips in place, and you'll need a very thin spudger (I've included a photo of the tool I used) to help you pull the 'wings' on the backside of the grips into place.