PANTONE Headphones Headband Base
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Headband Base of this Bluetooth headphones branded PANTONE.
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 398
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
The model name speaks for itself. I broke both of the headband bases on these PANTONE branded headphones. I had to remodel those parts from scratch, but they came out pretty well.
I've been using them for the last ⅔ weeks, and the 3D printed parts are just as good as the injection molded ones.
They are easy to print, and no supports are needed! If you need two of them, just duplicate them as they are the same for the right and left sides.
NB! You have to cut away a few support lines on the bottom.
I printed them on my P1P, so I don't have the gcode file for Prusas, but 3mf and stl should work fine, I hope.
Enjoy!