Prusa Mini Z-Axis Modification
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This modification will made the axis perpendicular.
- Ocena
- 5 / 5
- Polubienia
- 71
- Pobrania
- 217
- Wydruki
- 5
- Wyświetlenia
- 4854
- Oceny
- 5
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
This modification should make the all axis perpendicular to each other and the z-axis also should be more rigid.
Originally I planned to mill the z-plate. This version will came in the future, here I want to share a printable version.
This modification address the following issue and was discussed:
You do need:
- 200mm 3030-Extrusion
- a corner joint
- slotscrews and so on
The Spoolholder can be found here: https://www.thingiverse.com/thing:2537713
In advance:
Yes, there are some Z-Supports out there but they only made the Z-Axis more stiff but the do not eliminate the a twisted X/Y axis. And if your printer is twisted first then the prints are not really useable.