Bambu Lab A1 Mini High Capacity Poop Bucket
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wide and high walled, this Poop Bucket should help tame the A1's Poop Flinger
- Ocena
- 5 / 5
- Polubienia
- 35
- Pobrania
- 451
- Wydruki
- 2
- Wyświetlenia
- 2516
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bambu Lab Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A high walled Poop Bucket to help tame the A1 Mini's poop flinging abilities, this bucket is designed to maximize capacity while still fitting on the A1's build plate.
Sliced in Bambu Studio (Granted, at settings for my X1C, the A1 has a lower maximum speed) this print will take roughly 2 hours and 115-120g of filament depending on version.
The standard version has a vertical angle of 60 degrees, while the high angle version has an angle of 80 degrees, just in case the A1 decides to fling poo towards the front and back of the machine a bit more than expected.
Don't forget to post makes to get those PrusaMeters!