1 / 3
Replacement Anycubic Kobra Go/Kobra Neo Z Flag (Photoelectric Switch Baffle)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement part that will fit either a Kobra Go or a Kobra Neo
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 676
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Anycubic Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 0) (Komentarze: 0)Remiksy (1)Kolekcje (20)Powiązane
The included flag was bent for some reason so this was created to avoid replacing a non-print-impacting part.
You'll almost certainly want to use black filament for this print since you need to for sure block the IR light in the sensor.
I used Black Prusament PETG and it seems to reliably trigger for my unit.