1 / 4
Thule 1500052986 or Thule 52986 Cover Cap For Thule Evo Raised Rail
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement Cover Cap For Thule Evo Raised Rail. This is part number 1500052986 or 52986.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 66
- Wydruki
- 0
- Wyświetlenia
- 767
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Replacement Cover Cap For Thule Evo Raised Rail. This is part number 1500052986 or 52986. I lost two of these so far, so I made a printable replacement in SolidWorks.
- Print in FLEX or TPU
- TPU supports are tough to remove but you don't have to be gentle. Just grab the supports with toothed pliers and rip them off.
- .3mm layer height is fine for this.
- The attached .3mf file should open with the proper settings, orientation, and you'll see I sunk the part a small amount into the build plate.
- I left the end of the cap open for printability. A closed end only filled up with hard to remove support material and made the last few layers quite messy. The open end works just as well as a closed end.