Cantilever Scope Mount for 1 inch Scopes
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A cantilevered mount for 1 inch scopes w/recoil lugs!
- Ocena
- 5 / 5
- Polubienia
- 65
- Pobrania
- 533
- Wydruki
- 2
- Wyświetlenia
- 2106
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
Simple, strong, usable scope mount. Held zero for a year of constant use and abuse, and 5k rounds of the mighty .22 LR. The side clamp integrated supports may need some work to hold up the part.
Requires x14 M3 nuts, x8 M3x12 bolts, x6 M3x30 bolts.
Print ONLY from a stiff material that doesn't creep, something like fiber filled ASA/ABS, PC, and MAYBE annealed fiber filled nylon. PETG creeps and doesn't hold zero very well, and PLA will sag if slightly heated.
Print solid, with flat 45 degree sides down for ideal layering, supports on build plate only for mount base and rail clamp. Ring top doesn't need supports when oriented correctly.