NanoKontrol2 Dock
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
NanoKontrol2 dock I use to control my Wavelink audio for streaming
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 187
- Wydruki
- 3
- Wyświetlenia
- 1145
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Audio
- Licencja
- Creative Commons — Attribution — Noncommercial
Dock to house the Nanokontrol2. I used this with MidiMixer and the WaveLink plugin to control the Wavelink sofrtware from Elgato.
I've modified the model slightly since I printed it but not tested it due to having a new setup now. Providing this so that people that want to have their controller better placed on their desk. The model should just push together once printed and hold fast without any gluing or braces.
I used this cable from amazon to connect the Nanokontrol to the USB hub inside the dock itself
Orientate the print on your print bed so that the outer ends are facing the print bed. Printed at 0.2mm layer height with a 0.4mm nozzle.
I've provided a selection of tiles to slide in above each channel to identify which controls what on your software, and a blank tile should you wish to make your own. I printed all white for mine and used a sharpie to make the icons on the tiles stand out.
You will need supports for this, use whatever feels right for you. I found tree supports were the fastest.