1 / 2
Improved Anet A8 Dual Mosfet Mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A combination of the original Anet A8 Dual Mosfet Mount and a remix of it.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 47
- Wydruki
- 0
- Wyświetlenia
- 347
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A combination of the original Anet A8 Dual Mosfet Mount and a remix of it. Here are all of the changes:
- The screw holes for the frame were adjusted in such a way so that the mount is no longer tilted.
- The mount's base has had two holes added to it for smaller material usage.
- Enough room was left for the USB plug.
- The mosfet screw holes were slightly raised in case you have longer screws like I did.
Various fixes to the mesh's shell to make sure it prints correctly. One thing to note is that you should be careful when screwing the mosfets in. The mount's base has a tendency to bend around due to the thin structure, so be careful not to break it.
I have also included the Blender file in case you want to edit it further.
Print Settings
- Printer: Anet A8
- Rafts: No
- Supports: No
- Resolution: 0.2 mm
- Infill: 100%