1 / 4
Honeycomb Wall Miniature Paint Holder (Citadel, Vallejo, Army Painter, ...)
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holders for miniature paint brands. Various sizes available.
- Ocena
- 4,857 / 5
- Polubienia
- 442
- Pobrania
- 2154
- Wydruki
- 20
- Wyświetlenia
- 8887
- Oceny
- 21
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (7)Wydruki i komentarze (Wydruki: 20) (Komentarze: 32)Remiksy (8)Kolekcje (768)Powiązane
These are various holders for miniature / acrylic paints.
- 25mm (Vallejo, Army Painter, …)
- 33mm (Citadel / Games Workshop)
If the need comes up for myself, I will add other sizes as well in the future. If you want to change them yourself, I have attached the STEP files.
You will have to print three pieces for each holder:
- 1x Holder
- 2x Connector
Each item is already pre-oriented and has been designed to be printed as easily as possible.
You will have to glue the connectors to the holder, like this:

I used classic superglue (made sure to cover the entire contact area) and it's holding up fine.