Side mount for improved and easier loading on the Qidi X-Max 3
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Improve loading with this side mount for your Qidi X-Max 3
- Ocena
- 4 / 5
- Polubienia
- 58
- Pobrania
- 456
- Wydruki
- 1
- Wyświetlenia
- 2814
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Side mount for improved and easier loading on the Qidi X-Max 3. Compatible with the dry box. The box is rotated 45 degrees but the stays desiccant bag stays in place just fine. The bracket fits snug into the side handle.
I printed this out of ABS with a 15% fill, but you can use what ever you'd like.
You'll need:
M3x10mm screws to mount bracket to cover
Longer Bowden tube to reach run out sensor
M3x30mm cab head screw to mount Bowden bracket
Installation:
Drill 2 holes into the side cover where the bracket holes are. I used M3x10mm screws.
Remove the bottom rear cover screw and mount the Bowden tube holder to the bottom back cover using a M3x30 mm screw.
Install the dry box as shown and use a longer Bowden tube to connect to the run out sensor.
Most of all, Enjoy!