Trifolium Lamp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Trifolium Lamp Type A. Designed to be assambled with no screws, and printed with no support.
- Ocena
- 0 / 5
- Polubienia
- 49
- Pobrania
- 137
- Wydruki
- 0
- Wyświetlenia
- 936
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
- A PDF manual is included, to help assemble this lamp. -
- Printer size: -
Depending on what size print bed you have, you might want to see what size might be printable on your printer, then the following options for printing the ribs i recommend is:
For larger printers: Rib A & B single piece
For smaller printers: Rib A bottom & bottom + Rib B top & bottom + lock pin
- Bill Of Materials: -
3D Printed Parts:
| Fin Small | 12pcs |
| Fin large | 50pcs |
| Ring 1 | 1pc |
| Ring 2 | 1pc |
| Inner column | 1pc |
| Rib A | 6pcs |
| Rib B | 6pcs |
For smaller printers :
| Rib A top | 6pcs |
| Rib A bottom | 6pcs |
| Rib B top | 6pcs |
| Rib B bottom | 6pcs |
| Lock Pin | 12pcs |
(the Lock Pin these are only needed to assemble the top and bottom part of Rib A & B)
Filament for printed parts :
| Filament of your choise | 2-3kg (2-3 roles) |
Non Printable Parts:
| IKEA Hemma Cord Set | 1pc |
| E27 LED light bulb | 1pc |
https://www.ikea.com/gb/en/p/hemma-cord-set-white-10386577/
(A low wattage is preferred, to prevent softening the printed parts, due to heat dissipated from the bulb Max diameter 80mm)
- Pictures of the fully 3d printed version vill be uploaded, as soon as i have printed all of the parts, for now, it is only in white, since that was what i had laying around, but i can comfirm, that everything fits together with no problems, so far.
- Update: 09/10/2023 -
- The manual have been updated and corrected.