Hand MMU change Filaments in Layer like MMU by hand? Detroit Red Wings LOGO -> MMU
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
------------->>>> Look in the description <<<<--------------
- Ocena
- 0 / 5
- Polubienia
- 30
- Pobrania
- 38
- Wydruki
- 0
- Wyświetlenia
- 2768
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Hello, this is Logo of Hockey team Detroit Red Wings created for Multimaterial print.
You have two choices
1, You have MMU and you can print it normally with that.
2, You don't have MMU but you have time to change filaments manually.
PrusaSlicer 2.2 →
https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.2.0
PrusaSlicer 2.3 →
https://github.com/prusa3d/PrusaSlicer/releases/tag/version_2.3.0
How to print by hand filament change?
These instructions works for
Original Prusa i3 MK3/S/+
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
Attention use PrusaSlicer 2.2.0 because slicing Hillbert Curve in PrusaSlicer 2.3.0 takes approximately 10x more time than in PrusaSlicer 2.2.0
! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !
1, Import RED or WHITE file

2, Right mouse on file and select second file

3, Open printer settings

4, Set '' Original Prusa i3 MK3S MMU2S profile ''

5, Find Custom G-code

6, Write into Tool change G- code '' M600 ''

7, Find Extruder 1
(This is only for better orientation)

8, Change color on white
(This is only for better orientation)

9, Repeat step 7 for ‘’ Extruder 2 ‘’
(This is only for better orientation)

10, On the Plater change colors for RED and WHITE files


11, Turn the file upside down
for a very nice look after print on top side

12, Let's create cleaning objects
I use this cleaning objects because after filament change filament flows out and pressure in the nozzle is not enough and it may leave a defect. This cleaning Box will be always printed before logo

change height of box on 0.8mm

Right click on box and create two BOX modifiers

now move the modifiers to overlap the other BOX as well

now assign to one modificator WHITE color and to second modificator RED color

13, Find Print settings

14, Set 0,30mm DRAFT profile

15, In Layer and perimeters change:


16, In infill section change:

17, make sure you are in advanced or expert mode
in the top right corner of your screen of PrusaSlicer

18, In Multiple Extruders disable Wipe tower


19, If you will scale Logo, make sure that after scale is Logo Z heigh 0,8mm
if not then select file → unlock lock

Select ''YES''

Rewrite size on 0.8mm

?? if you have higher print, you will spend more time with printer ??
20, Slice!
…………………………………………………………………………………………………………………………………………………….
how can i know which color will be next, if i have more than 2 colors?
…………………………………………………………………………………………………………………………………………………….
PrusaSlicer 2.3
On the bottom slider you can see which color will be next

PrusaSLicer 2.2 and lower
1, Export G-code
2, Find Folder with PrusaSlicer 2.3
3, Open '' prusa-gcodeviewer ''

4, Find and open G-code

5, in the left bottom corner switch to color print

6, on the right slider go to Z heigh 0.20
