Fuel Tank Cap Tether Clip
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Clip to hold the leash on your gas cap.
- Ocena
- 5 / 5
- Polubienia
- 9
- Pobrania
- 81
- Wydruki
- 1
- Wyświetlenia
- 562
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Share Alike
Print on it's side, use the thickest layer your printer is good at.
Use a material that can take your expected ambient heat and has a bit of give. PLA is not recommended. Nylon would probably be the best but I got away with PETG though I broke the first one. (It's a 2min print, so not a big deal.)
Clip it through the gas cap retainer strap, then clip it through the hole in the gas flap.
Known to work on a 2011 Subaru Forester.
You could also bake it for more strength, it's probably not so precise a part that a little warping would impact it's functionality.