Filament spool winder for transfering wrong wrapped to another spool
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I was furious about wrong winded filament spools. So i created something useful to solve the problem in a couple of…
- Ocena
- 5 / 5
- Polubienia
- 46
- Pobrania
- 365
- Wydruki
- 3
- Wyświetlenia
- 2122
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Public Domain
I was furious about wrong winded filament spools.
So i created something useful to solve the problem in a couple of minutes.
The only thing you need is another empty spool, a screm M8x80 and two nuts.
Its fun now!
Have a nice day :)
Print Settings
Printer Brand:
Artillery
Printer:
Artillery Genius
Rafts:
No
Supports:
No
Resolution:
0.3
Infill:
20%
Filament: free PLA+ / PETG recommended free
Notes:
Place the thing with the small diameter to to print surface.
Thats it!
Tighten the nut with your fingers, thats enough.
You can unwind a full spool in 5min...
Have a nice day :)
Category: 3D Printers