Insta360 X3 desktop Stand fits with metal case installed
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Desktop stand that you can leave the metal frame on and access buttons without removing frame for work.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 386
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I use a metal frame on my insta360 X3 camera so the camera does not take any stresses when mounted and I can also use a GoPro style mount. Problem is, all the desktop stands do not allow you to leave the frame on while your working in the studio downloading or what have you. So I made this so I can just grab the camera as is, plug into the PC and go. You can access the power button and the USB C port as shown in the pictures. And my metal frame has a cold shoe on the top and lower right side and this stand accounts for the lower cold shoe.
I used lightning infill as it just sits there on the desk and really needs no real heavy duty strength, and the base size is plenty enough to give it a solid base so it does not tip over like so many available out there. We don't want our 360 cameras falling over!
I did add a color change in the G code so the logo pops in the last several min of print. With that said, you can stop the print early if you want low profile letters or just slice them off.
No supports needed at all, no issues warping. Easy print.