1 / 3
usb chamber inlet for voron beacon probe or can bus
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a mod to allow the passthrough of a usb cable into the chamber along the same route as the ptfe tube.
- Ocena
- 0 / 5
- Polubienia
- 13
- Pobrania
- 59
- Wydruki
- 0
- Wyświetlenia
- 676
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
SzczegółyPliki (2)Wydruki i komentarze (Wydruki: 0) (Komentarze: 1)Remiksy (0)Kolekcje (22)Powiązane
This is a modification to the original voron ptfe mount plate. This allows for an additional cable to be run along the same route as the ptfe tube and still being able to use the original hex cover plate. Im using it for beacon probe on a 2.4 so i don't have to run it through the cable chains. The plug is a slip fit and i would advise a drop of glue only if you have trouble keeping it in.