Funnel and Tamper for Bialetti Musa 2 Cups
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A funnel fitting Bialetti Musa 2 cups moka pot and matching tamper to collect the coffee grounds in the basket.
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 785
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
Inspired by the original model, I made funnel and tamper for Bialetti Musa 2 Cup moka pot. It will probably fit other Bialetti stainless steel models (2 cup size).
Note the tamper is not intended for compacting the coffee grounds. It should only be used to gently flatten the coffee grounds to be flush with the basket top.
To print the funnel, place the model up side down and no support is needed. Also use a brim to allow for good bed adhesion. Tamper can be printed in the upright orientation normally, no brim necessary.
