Extras - Double Stack IKEA LACK Enclosure V2 (works w/ MMU2s)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Modified Corner pieces to fit provided Ikea 2-sided screws. Also a mirrored corner piece with cable slot.
- Ocena
- 0 / 5
- Polubienia
- 37
- Pobrania
- 203
- Wydruki
- 0
- Wyświetlenia
- 2233
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
Modified model files from following project:
https://www.prusaprinters.org/prints/22008-double-stack-ikea-lack-enclosure-v2-works-w-mmu2s
In his instructions, For top corners it is instructed to drill the hole of the corner pieces as they are too small. So I adjusted me model to fit the screws with no need of a drill. Also wanted to have all 4 back corners to have a hole to customize my cable management further, so I added a corner piece with the hole for the opposite side.
I also found the enclosure to be more sturdy mounting the bottom corners with the same large 2-way Screws provided with the Lack tables as are instructed for the top corners.
*These are only extra pieces for Mordiev's project, Please go to his print for all files and instructions*