MOKA COFFEE FUNNEL 3 CUP MODEL 55mm - FAST PRINT
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made for 55mm or 3 cup models, scale up or down from there to suit your needs, mine is made in VASE MODE 0.8mm nozzle.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 62
- Wydruki
- 0
- Wyświetlenia
- 317
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Made for 55mm or 3 cup models, it is the inner diameter of the coffee holder. Scale up or down from there within slicer to suit your needs. Scale it down for espresso machine use.
DESIGNED FOR VASE MODE 0.8mm nozzle EXTREMELY FAST PRINT - NO BOTTOM LAYER FOR FUNNEL, CLOSED BOTTOM LAYER FOR TAMPER
Tamper is optional, some people do it, some don't - depending on the grain size and other variables. It could also be used for leveling or as a single tone instrument (lucky coincidence or design mastery?). Probably height variation(Z scale) would produce different tones
For advertising and tagging specific coffee pot make and model please contact me.
SHARE LIKE COMMENT TIP - POST A MAKE
My other designs
https://www.printables.com/social/296116-the-sloppy-apprentice/models
https://www.thingiverse.com/thesloppyapprentice/designs
Take a look at my youtube channel:
https://www.youtube.com/channel/UCqKU0euRjGItYjY0grGPFjw
Category: Kitchen & Dining