Spur Gear Differential
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a model of a spur gear differential designed for 3D printing.
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 417
- Wydruki
- 0
- Wyświetlenia
- 2843
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a model of a spur gear differential designed for 3D printing. It is used for example in the Porsche Taycan front axle.
The two sun gears have the same number of teeth, one is extremly positiv shifted and the other one is extremly negativ shifted. For this reason one is more then one tooth height bigger then the other one.Therefor the "Planetary Gear_1" doesnt interlock with the "Sun Gear_2"
The Files "Carrier without Support" and "Stand_1 without Support" have a 0.2mm layer at the overhanging holes, so that no support is needed. You only have to clean out the holes after printing.
You need:
1x Carrier
1x Stand_1
1x Stand_2
1x Sun Gear_1
1x Sun Gear_2
1x Output Shaft_1
1x Output Shaft_2
3x Planetary Gear_1
3x Planetary Gear_2
6x Pin
8x M3x8
4x M3x12