1 / 4
Replacement Foot for 'Fauteuil repas avec coussin' chair by Sifas
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The original feet are small, break easily and can be damaging to wooden floors. The replacement foot is sturdy and soft
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 99
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- GNU General Public License v2.0
Part
Fauteuil repas avec coussin chair by Sifas (part of the Oskar furniture set): https://www.sifas.com/product/fauteuil-repas-avec-coussin-oskar/
Story
My father has 5 of these chairs on his lake boat, but was dissapointed when the feet began to break off and tear up the wooden deck on the boat.
Additional parts (both of these can be found with a search on amazon.com):
- ziptie: 2.5mm by 200 mm
- felt pad: 1 inch diameter with stick on surface
Instructions for chair attachment
- remove the old foot
- slide a ziptie through the slot on the printed part
- press the one inch felt foot pad into the cup on the printed part
- push the replacement foot onto the end of the chair leg
- close the zip tie around the bar on the chair leg and tighten
- proceed to replace all 4 feet
Print instructions
- PETG material: (good for outdoor use and warmer temperatures)
- no supports: orient on the flat surface (with the foot upsidedown)
- 3 layer brim: keeps the print from breaking loose
Model Creation
- onshape.com: CAD software with free hobby user licesnce
- clone the model and make your own modifications: https://cad.onshape.com/documents/723b6f0b43c751cfe2dc5b5c/w/5ccb4cdc4b77c0fab2ca326a/e/0979823df75ec61e5b7d8620?renderMode=0&uiState=650dc1f7c36cf838bbf082b7