Dremel Holder - Clamp Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Wstępna wycena dla PETG
3,15 € – 3,85 € netto (bez VAT)
Dla pliku: Dremel Holder - Clamp Adapter V01_0.4n_0.2mm_PETG_MK3S_3h52m.gcode
To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.
Plik i założenia wyceny
Plik użyty do wyceny
Średnia wycena orientacyjna: 3,50 € netto (środek widełek).
- Masa podana przez autora
- 39 g
- Czas druku podany przez autora
- 3,86 godz.
- Materiał u źródła
- PET
- Materiał wyceny
- PETG
- Drukarka wyceny
- Bambu Lab P1S - 0.4 nozzle
- Proces wyceny
- 0.20mm Standard
Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.
Zapisane na tym urządzeniu.
Extrusion replacement.
- Ocena
- 0 / 5
- Polubienia
- 40
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 772
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
If you don't have a piece of extrusion, you can use a clamp. Remix of Easy Dremel holder for vice by @radicalreel.
Print instructions:
I decided to use PETG. I recommend strengthening the entire model and also the walls around the nuts. Unfortunately, supports are also necessary. I chose organic. See the attached 3MF file for detailed print settings.
Part List:
- Printed part [x1]
- Bolt Mx25 [x2]
- Nut M4 [x2]
Consider please using stainless steel bolts and nuts.
Assembly Instructions:

Custom modification:
If you want to modify the model, I am attaching the STEP file and a link to my OnShape.
You can customize the model by simply changing the parameters.
Note:
Please don't forget to leave a rating or a comment. I will be glad for any feedback, so I can correct any mistakes in the design. Thank you very much.