1 / 2
BenQ ScreenBar Diffuser
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This makes the BenQ ScreenBar's lowest setting a bit more manageable when in a fully dark room.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 34
- Wydruki
- 0
- Wyświetlenia
- 878
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Public Domain
This is a really simple diffuser for the ScreenBar. The lowest setting on the ScreenBar was still a bit too bright for me. You'll need to print two and either glue or melt them together. I personally used a soldering iron to melt them together as glue wasn't working super well. I printed mine in Prusament Pearl White and it's pretty much the perfect brightness when printed at 2MM for me.
It should for the most part snap into place, but I used 2 small clear elastics to make sure it's a tight fit.