Honda 919/Hornet 900 Intake
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replaces Factory Intake Tube
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 125
- Wydruki
- 0
- Wyświetlenia
- 831
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
2002-2007 Honda 919/Hornet 900/CB900F Intake Tube Replacement
A common modification on this motorcycle is to remove the vacuum operated trap door within the factory intake tube for more airflow. This item gets rid of the entire intake tube and allows fresh air directly into the filter area.
Any OEM sized air filter can be used.
A silicone, 67mm or 2.75in ID, 90degree elbow can even be attached to force airflow directly into the filter area. This is only recommended for track use though, as I've found the elbow loosens overtime.
Not recommended for use in heavy rain, or very dusty environments
Make sure to plug the original vacuum line that ran to the intake
Print as shown (filter side up), with Supports
60% or More Infill Recommended for Strength