The Mandalorian Support Free Remix Pose 1/5
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A very good model from Velrock. Remixed to support free and printed. Original https://www.thingiverse.com/thing:3989757
- Ocena
- 4,902 / 5
- Polubienia
- 657
- Pobrania
- 3508
- Wydruki
- 86
- Wyświetlenia
- 11 820
- Oceny
- 41
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
*** Yet another pose here:
https://www.thingiverse.com/thing:4672484
Subscribe Now!
A very good model from Velrock.
Time-lapse print video : https://youtu.be/4lXVR1HwAAU
Remix to support free and printed.
(Updated to Mandalorian_SupportFree_icz_E.stl. Left shoulder fixed. Thx to Expulsive.)
Also include the MudHorn engraving Mandalorian_MHEngrave_SupportFree_icz.stl (Remixed from https://www.thingiverse.com/thing:4085369 )
Baby Yoda : https://www.thingiverse.com/make:837558
Yet another pose available soon.
Live print in progress.
Subscribe to find out more support free 4K Time-lapse video:
Subscribe Now!http://www.youtube.com/iczfirz
Addiction to 3D Printing? Watch these time-lapse!
https://youtu.be/-ZsXFX6hjXk
https://youtu.be/L4IDmn3miE0
https://youtu.be/vVaeYkDoaJU
https://youtu.be/BnJKkmsqTt0
https://youtu.be/MUwXdUdHs64
https://youtu.be/jKpW-CI5O6M
https://youtu.be/J8bSrSSTLVE
https://youtu.be/udcIfDywoIo
https://youtu.be/XKDxQ8CsMJU
https://youtu.be/-M99N8JkQxQ
https://youtu.be/H-\_2R-mKoMo
https://youtu.be/XyuQwsT36J4
https://www.youtube.com/watch?v=3NDJFnoX\_3g
https://www.youtube.com/watch?v=qtqErycp1b8
https://youtu.be/vPmPJOiqFYw
https://youtu.be/lwuSK4M\_dRs
https://www.youtube.com/watch?v=MKl\_LkOERvs
https://youtu.be/5WOnIP-qwVk
https://youtu.be/RLnsV9CKTNU
https://youtu.be/9w7k7XRm34Q
https://youtu.be/uxLFw1A8tTA
https://youtu.be/F1pj7ACaZ70
https://youtu.be/tbOhFjlpp0c
Print Settings
Printer:
Any
Rafts:
No
Supports:
No
Filament: Any PLA Silver
Notes:
0.2mm layer
0.4mm nozzle
2 perimeter
150mm height
0 infill
For simplify3d user (special thanks to TM74), you have to enable "Merge all outlines into one single solid model" in the advanced settings. Without this option, there are holes all over the model.
Category: People