1 / 4
Connectors w/ 10mm Spacer for use with Skadis by BicyclerepairGM — zdjęcie 1
1 / 4

Connectors w/ 10mm Spacer for use with Skadis by BicyclerepairGM

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

These connectors enable you to link multiple of the printer-optimized Skadis panels using standard nuts and bolts

Ocena
0 / 5
Polubienia
16
Pobrania
66
Wydruki
0
Wyświetlenia
515
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution

These simple connectors are meant to be used with https://www.printables.com/model/559914-skadis so that you can connect multiple of these panels, and mount them to the wall using only four 10mm wall spacers of your choice for the whole connected group of panels rather than 4 mounts per individual panel component. Basically, I wanted to make fewer holes in my wall.

I used #6-32 x 1/2in machine screws because I live in a country that doesn't believe in meaningful numbers and these were easier to find at the hardware store, but M3.5 x 12mm would probably be ideal.

 

Tagi