Griff für Arbeitsscheinwerfer Drehbank Hans Schreiner
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ersatzgriff Arbeitsscheinwerfer für Hans Schreiner Drehbank Replacement handle worklight of a Hans Schreiner lathe
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 132
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Mechanical Parts
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
DE:
Exaktes Modell der Drehbank: MDB-S1100K51-DIGITAL
Um den Griff zu Tauschen, müssen auf der Rückseite des Scheinwerfers alles Schrauben entfernt werden. Dann die Abdeckung abnehmen, eventuell vorhanden Reste des kaputten Griffes entfernen und dann den neunen Griff in das Alugehäuse einschieben. Rückseite wieder anbringen und alles Schrauben eindrehen.
Den Griff habe ich auf der Seite liegend gedruckt damit die Stabilität am größten ist. Support wird für den Schwalbenschwanz benötigt.
EN:
Exact model of the lathe: MDB-S1100K51-DIGITAL
To replace the handle, remove all screws from the back of the headlight. Then remove the cover, remove any remains of the broken handle and then insert the new handle into the aluminum housing. Reattach the back and screw in all the screws.
I printed the handle lying on its side for stability. Support is needed for the dovetail.