1 / 2
Prusa Enclosure Lighting, Ikea Ledburg LED Holder — zdjęcie 1
1 / 2

Prusa Enclosure Lighting, Ikea Ledburg LED Holder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Simple lighting mod for the Prusa Enclosure using an IKEA Ledburg LED bar

Ocena
0 / 5
Polubienia
1
Pobrania
11
Wydruki
0
Wyświetlenia
133
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

From the Prusa Enclosure spares, use a M4 screw with to square nut to mount. 

Insert the square nut into slot of the plastic holder and put the screw in from the outer top wall via one of the empty holes. In my setup I ran this diagionally to allow for the cables to be tidy at the back with zipties.

Tagi