1 / 2
Gewicht für Sunlu Spulen zur Füllung mit 1,5mm Blei Kugeln / AMS spool weight for Sunlu spools — zdjęcie 1
1 / 2

Gewicht für Sunlu Spulen zur Füllung mit 1,5mm Blei Kugeln / AMS spool weight for Sunlu spools

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Sunlu Spulengewicht

Ocena
0 / 5
Polubienia
8
Pobrania
100
Wydruki
0
Wyświetlenia
835
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

Vom Printables Nutzer “Mandalorian_SC” Abgewandeltes Spulengewicht zur Nutzung mit 1.5mm Blei Kugeln, wenn bis oben wie auf dem Bild zu sehen gefüllt, wiegt das Spulengewicht ca. 470g, am Deckel ist eine Erhöhung eingearbeitet damit die Kugeln nicht unter dem Deckel umher rollen. Gedruckt in PLA mit variabler Layer Höhe, im Bereich der Gewinde sind die Layer bei mir 0,13mm, passte wunderbar.

 

From Printables user “Mandalorian_SC” Modified spool weight for use with 1.5mm lead balls, when filled to the top as shown in the picture, the spool weight weighs approx. 470g, there is an increase on the lid so that the balls do not roll around under the lid. Printed in PLA with variable layer height, the layers in the thread area are 0.13mm for me, it fit wonderfully.

Tagi