Philips Sonicare Holder (with drain geometry)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Toothbrush holder with drain holes so managing water rings is easier.
- Ocena
- 4,75 / 5
- Polubienia
- 33
- Pobrania
- 270
- Wydruki
- 5
- Wyświetlenia
- 817
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Bathroom
- Licencja
- Creative Commons — Attribution — Noncommercial
Say goodbye to water stains left by your electric toothbrush. You can either mount this with some double sided tape like I did or just let it stand on its own.
I liked the simple design idea of this holder by Marc Elbichon but wanted it to print without supports / worry about orientation.
Also, the spike in the middle was massive so I made mine just big enough to give the brush something more to grab on to.
**Updated .3mf file and step file available.
**Updated model has chamfer at base for better strength and durability.
Once you load the step file in your slicer, you will see it is 2 bodies.
Set the inner body to have more walls than the other body, this will ensure the chamfer has support all the way to the base of the model instead of just along the top surface where it can still be easily broken.