Handed Lasko Box Fan Feet - Supportless?
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
New feet for Lasko Box Fans.. because. Left and Right to eliminate support material.
- Ocena
- 5 / 5
- Polubienia
- 72
- Pobrania
- 654
- Wydruki
- 5
- Wyświetlenia
- 1460
- Oceny
- 6
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution — Share Alike
So I need some new feet for my Lasko box fans... who doesn't... those things break so easy it's criminal. In any case I looked on Thingiverse and there are several available but they all need lots of support. If I'm going to use extra filament, I want it to be on the part! Not to mention a lot of them lament how hard it is to remove the supports.
The way to get rid of those nasty supports is to print these things on their side and I also chose to move the supported part to one side or the other (right and left) The fan won't care that they are asymmetrical and its not like you're paying for tooling or molds here. When these print they only have a few tiny supports and they are very very easy to remove. With better printers you may not need the supports at all. I also made the rest of the foot a big slab. With low infill these still print pretty fast and all that plastic is going to an aesthetic fan foot instead of support material.
There are a righty and a lefty but you can just print two of one or the other if you want. I tend to like the symmetry of having them offset both to the outside or what not.
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/afZlsb34P23
Print Settings
Printer Brand:
Monoprice, Prusa
Printer:
Select Mini, Prusa i3 MK3/MMU2
Rafts:
No
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
I used 30%, I'm sure lower is fine.