1 / 1
PS5 Controller Stand Holder
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An easy FDM printable stand to hold your PS5 controller.
- Ocena
- 4,968 / 5
- Polubienia
- 355
- Pobrania
- 3680
- Wydruki
- 37
- Wyświetlenia
- 16 808
- Oceny
- 31
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Video Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
SzczegółyPliki (3)Wydruki i komentarze (Wydruki: 37) (Komentarze: 52)Remiksy (3)Kolekcje (396)Powiązane
An easy FDM printable stand to hold your PS5 controller in the look of a PS5.
There are already some models out there but they don't quite hold the controller as snug as I'd like plus the printing or the assembly were often times a hazzle.
Hence I made my own version that is easy to print and easy to assemble and relatively fast to print.
Instruction
- Download the .STL file and open it in your prefered slicer
- Slice the model as opened and then print it
- For the base make sure to set your seams to «rear» or «paint» it for a better look
- After printing the parts simply clip the panels into the base. They should hold firmly through friction.
Note that your 3D printer needs to be calibrated well.
Specification
- Base: 40mm x 60mm
- Total Height: 69mm
Print Settings
- Infill: Gyroid 10-15%
- Perimeters: 2-3
- Layer height: 0.2mm - 0.3mm
- Seam: Rear
- Supports: none