Parametric Gridfinity baseplate to fill any size drawer base plate
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a parametric fusion 360 model that allows boarders to be added to the baseplate to perfectly fit any size drawer
- Ocena
- 5 / 5
- Polubienia
- 234
- Pobrania
- 4068
- Wydruki
- 6
- Wyświetlenia
- 16 775
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
PLEASE GIVE THE MODEL A LIKE
This is a parametric Gridfinity Base plate that is a full rebuild based on Zack Friedmans original designs. It has Parameters for the width and depth of the drawer as well as how many gridfinity squares in X and Y you want. It will centre the base plate left to right and put the grid right at the front of the drawer with all depth boarder at the back of the drawer. There is also a parameter called front boarder that will push the grid back from the front of the drawer as far as you set it.
The last group of features in the feature tree is a few offset planes and cut extrudes that I used to chop the grid up for printing but it is currently set to suppressed.
Edit: Now improved to include the floor function as first implemented by @tone_227241 but also takes in to account the front boarder as I noticed if you set the drawer size to an exact multiple of 42 it would still brake. Its still not perfect as you cant set the front boarder to zero without breaking it but I guess if your drawer is an exact multiple of 42mm set the front boarder to 0.01mm and the depth to (x*42)+0.01mm to get it as pretty spot on