Black Knight Helmet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
None Shall Pass! This is my take on the Helmet for the Black Knight. The picture shows this at 50% because I wanted to…
- Ocena
- 5 / 5
- Polubienia
- 293
- Pobrania
- 929
- Wydruki
- 6
- Wyświetlenia
- 5109
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Attribution — Noncommercial
None Shall Pass! This is my take on the Helmet for the Black Knight. The picture shows this at 50% because I wanted to see how this would print and finish. For a wearable helmet, just leave it at 100%. My print bed could not handle full size and I didn't want to split and reconnect full sized pieces.
I did my best with dimensions and bolt count, given the quality of video available for this subject. But I think it is pretty screen accurate. Please enjoy, let me know what you think.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
No
Supports:
Yes
.2
Infill:
15%
Filament:
N/A PLA N/A
Notes:
Depending one your printer's habit and characteristics, orient model to print edge side down, supports only necessary for the top of the arch angle. You'll see what I mean when you orient to the print plate.
Category: Props