Sigma 18-35 Lens Hood
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement lens hood for sigma 18-35 art lens to use with 77mm filters
- Ocena
- 5 / 5
- Polubienia
- 14
- Pobrania
- 161
- Wydruki
- 1
- Wyświetlenia
- 941
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a replacement lens hood to fit the Sigma 18-35mm Art lens. The lens is 72mm thread but I use 77mm filters with an adapter. With the adapter it wasn't possible to still use the stock lens hood.
I created this hood so that it can stay mounted to the lens but is able to retract in order to change filters. In the retracted position the petals on it still stick forward enough that I don't bother putting a cap back on my lens when I stick it in my bag. The hood also has a slot in the bottom to adjust circular polarizers without retracting though the usefulness of that will vary depending on how stiff your filters are to turn.
I printed mine with PETG for the lens ring and CF-PETG for the hood because it was more matte.
Check out the demonstration video here: