Bigtreetech TFT35 E3 V3 Case for 4040 extrusion
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Case and adjustable mounting bracket to hold a BTT TFT35 E3 touch screen
- Ocena
- 0 / 5
- Polubienia
- 25
- Pobrania
- 196
- Wydruki
- 0
- Wyświetlenia
- 836
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a case for the BTT TFT35 E3 V3 touch screen. It mounts to a 4040 extrusion and uses a ball socket with a nut to adjust the tilt and angle of the display. Openings are provided on the side for the USB and card slot as well as for the Wifi module.
The two halves of the case click together with a snap fitting and have a positive connection but are still reasonably easy to separate when needed. To attach the ball socket to the bottom of the case you will need one M5x10mm bolt/washer and one M5 nut. The nut gets captured into the ball socket part by pausing the print and dropping the nut into place.
I suggest printing with PETG for the bit of extra flexibility it provides for the snap connections. The mount arm and the ball socket parts will need to be printed with support